Site Search Tool
Search by Part Number
 
Quick Links
  Resource Directory
  About Us
  Contact Us
  Terms & Conditions
  Privacy Policy
     
Companion Sites

Please visit our entire family of online industrial supply outlets!

MeineckeMeters.com
Mechanical Turbine Water Meters
BuyHedland.com
Hedland Variable Area Flow Meters
BuyJamesbury.com
Jamesbury Ball Valves
ShopCross.com
Safety, Valves, Meters, Hydraulics
Divider

Product:  Calibration Container 5-Gallon
<< Previous in G2 Series Modules - Next in G2 Series Modules >>
GPI 5-Gallon Calibration Container
MSRP: $120.00
Our Price: $96.00
You Save: $24.00
6 in stock (Greensboro, NC 27410)
Item Number: 116000-1
Mfg: GPI/Flomec
Mfg's Part Number: 116000-1
Features: NOTE: THIS PRODUCT IS NOT RECOMMENDED FOR USE WITH PETROLEUM PRODUCTS! Damage or deformation of this container as a result of exposure to petroleum products will not be covered under the mfg's warranty.

 

Important Note: This calibration container is not recommended for use with petroleum products.

GPI - 5 Gallon Calibration Container Part Number: 116000-1

It is very important to verify meter accuracy and calibrate, as necessary, with an accurate calibration container. Meter calibration is critical for accurate fluid measurement. Variations in fluid characteristics, viscosity shift due to temperature changes, and varying flow rates can affect the accuracy. An accurate measurement container is important to facilitate the verification and calibration process. The GPI Calibration Container has been designed to provide an accurate, economical calibration measure. The blow-molded polyethylene construction makes it very strong and durable, yet lightweight.

Use the GPI Calibration Container with most noncommercial liquid flow meters. Follow the meter manufacturer's calibration instructions when field calibrating the meter. Each container is individually calibrated at the factory to an accuracy of +/- 0.5 percent. Accuracy may vary depending upon fluid and temperature at the time of use.

Before each use, make sure the container is clean and the scale-reading area is clear for best visibility of the fluid level. Place the container on a flat level surface. Fill to the 5-gallon or 20-litre marker on the scale. Allow for any foaming action that may occur. Calibration Container - Scale

NOTE: Varying lighting conditions may make it difficult to view the levels of certain liquids through the container material. If this occurs, position the container directly in front of a light source, such as a flashlight, to improve liquid level viewing. After filling the container with fluid to the zero mark, check the meter reading. The meter reading should match the dispensed units in the calibration container. Recalibrate the meter if the error margin between the meter reading and the container scale is not satisfactory. Clean the container thoroughly after each use to prevent any residue buildup and to maintain maximum accuracy. To clean, flush the container with water or the chemical manufacturer's suggested cleaning fluid and replace the container lid.

Warning: To avoid chemical exposure, follow chemical manufacturer's instructions for the disposal of contaminated water.

Downloads: Operations Manual

Product Reviews

(0 Ratings, 0 Reviews)
Your cart is empty.
 

We Accept:
 
We accept Visa, MC and AMEX

Secure Transactions by:
 

A Business Unit of...
A Business Unit of Cross Company, Established 1954

Log-In / Log-Out