Combine the Conditioned Signal Output Module with a GPI Turbine Kit to create a low-cost flow sensor with digital signal output which interfaces with various counters, controllers and compatible process equipment.

Conditioned Signal Output Module

Conditioned Signal Output Module


Conditioned Signal Output Module
Part Number: 113435-1
Quick Description:

This module provides an un-scaled, amplified, digital signal from a GPI turbine housing. This module's digital output eliminates the need for additional signal conditioning equipment. Operational Temperature is -40'F to +212'F (-40'C to +100'C). Externally powered, 9 to 35 VDC. (No Flow Computer Required)

Features & Benefits:

  • Provides 2 digital signals:
    Open Collector or Square Wave
  • Communicates with most Process Control devises
  • Eliminates additional amplification or signal conditioning devices
  • Signal transmission up to 5,000 ft. (1,524 m)
  • Can be externally or battery powered

Detailed Description:

Combine the Conditioned Signal Output Module with a GPI Turbine and create a low-cost flow sensor with digital signal output that interfaces with various counters, controllers, and compatible process equipment.

This module provides an un-scaled, amplified, digital signal capable of transmission up to 5,000 feet (1,524 m). There is no need for additional signal conditioning or amplification devices to achieve the desired digital signal. The module is factory assembled for open collector signal output and operates from an external 9 to 35 volt power source. By changing terminal connections and adding a battery kit, the module provides a self-powered 6-volt square wave signal.

Use this module with GPI Industrial or Commercial Grade Turbine Meters
Technical Specifications
Frequency: 0 to 750 Hz
Housing Material: Aluminum with amorphous nylon inner housing
Connector: Hubble PG7
Cable: Belden 9363 or equivalent Standard length of 10 ft. (3 m). Other lengths available.
Temperature: -40'F to +212'F (-40'C to +100'C)
Power: External, 9 to 35 volt DC, approximately 1 mA.
Connection: Three wire
Input: Low level sine wave from incorporated magnetic pickoff coil.
Output: Open Collector Current Sinking Output. Square Wave Pulse. Amplitude same as supplied input voltage.

Note: Customer must supply minimum 820 ohm Pull Up Resister. (1K resistor - OK)

Open Collector Wiring Diagram

6 Volt Square Wave Output

Power: Dual Lithium Batteries*
Connection: Two Wire
Input: Low level sine wave from incorporated magnetic pickoff coil.
Output: Square wave pulse 6 volt amplitude

*Add GPI Battery Kit for 6 volt Square Wave Output. Specify at time of order.

6 Volt Square Wave Wiring Diagram
Typical Mounting

Mounting Diagram

Price: $228.95
Buy Product Online | Visit Store Home
 
Manufactured by GPI


 Other Items from Modules

  Remote Cable Kit - 100 Feet (30 Meters) for Standard and FM Remote Kits. 2-Wire
  Remote Kit for 2 Inch A1 Meters - The kit modifies the 2 Inch GPI Electronic Digital Meters for applications in specialized situations including remote indication and high or low fluid temperature metering applications.
  FM Approved Remote Kit Assembly - The Factory Mutual (FM) Approved Remote Kit Assembly Modifies all GPI Electronic Digital Meters for applications in specialized situations including remote indication and high or low fluid temperature metering applications.
  Conditioned Signal Output Module - Combine the Conditioned Signal Output Module with a GPI Turbine Kit to create a low-cost flow sensor with digital signal output which interfaces with various counters, controllers and compatible process equipment.
  Standard Remote Kit Assembly - The kit modifies GPI's Electronic Digital Meters for applications in specialized situations including remote indication and high or low fluid temperature metering applications.

 
  Return To BuyGPI.com - Your GPI Turbine & Oval Gear Flow Meter Store

 

 
e-commerce software
E-commerce powered by MonsterCommerce shopping cart software.