GPI's Electronic Programmer was designed to allow end users the ability to customize and configure GPI Electronics to meet your specific needs using a laptop or desktop PC.

GPI Electronics Programmer

GPI Electronic Programmer


GPI's Electronic Programmer was designed to allow end users the ability to quickly customize and configure GPI Electronics to meet their specific application(s) using a laptop or desktop computer.

The Kit comes with a USB Cable, a Software CD and a GPI Electronics Programming Board. Installation is simple! The CD includes complete installation and operating instructions.

When connected, you can perform the following functions:

  • Read the current setting;

  • Write a new configuration setup;

  • Edit all the configuration setups;

  • Store complete configuration settings;

  • Load a complete configuration setting;

  • Print a hardcopy of the settings to your systems printer.

Part Number: 113800-06
The software displays a menu driven system of establishing or changing your electronics . This kit is perfect for reconfiguring multiple GPI Electronics for the first time or whenever changing the configuration is needed over the lifetime of the meter. Use it to reconfigure a spare display to keep on the shelf.

Common uses for the Electronics Programmer include reconfiguration to effect the following menu changes:

  • Lock-Out Function;

  • Select number of totals & rate;

  • Select gallons or liters and the number of calibration curves;

  • Change the calibration procedure from DD to K-Factor entry;

  • Input 15-Point K-Factor;

  • Print a configuration/calibration sheet;

  • Change or adjust K-Factors

The GPI Electronics Programmer works on any GPI "09" Series Flow Computer including:

  • G2 Industrial Series Meters

  • Remote Transmitters

  • A1 Commercial Series Meters

  • TM Economy Series PVC Meters

  • GM Series Oval Gear Meters

Price: $183.00
Buy Product Online | Visit Store Home
 
Manufactured by GPI


 Other Items from G2 Series Modules

  FM Approved Remote Kit Assembly - The Factory Mutual (FM) Approved Remote Kit Assembly Modifies all GPI Electronic Digital Meters for applications in specialized situations including remote indication and high or low fluid temperature metering applications.
  Standard Remote Kit Assembly - The kit modifies GPI's Electronic Digital Meters for applications in specialized situations including remote indication and high or low fluid temperature metering applications.
  90 degree Adaptor Kit - GPI's new 90' Adaptor Kit allows for horizontal readouts on vertically mounted inline meters.
  4-20mA Module - Combine the 4-20mA Module with an Industrial Grade Turbine and Computer Electronics to provide an industry standard analog signal for connection to a wide variety of chart recorders, display equipment and process control equipment.
  External Power Module - Combining the External Power Module with Pulse Access Module and Industrial Grade Turbine allows the use of an external power source (7 to 30Vdc) that supplies voltage to the Computer Electronics.
  Pulse Access Module - Combining this Module with an Industrial Grade Turbine and Computer Electronics creates a low-cost flow sensor with both local readout and a pulse output which interfaces with various counters, controllers and compatible process equipment.
  Calibration Container 5-Gallon - Use this Calibration Container to field calibrate your GPI Flow Meter.
  FM Approved Sensor Kit - Designed for use with G2 Turbine Meters when pulse output is required and the meter is located with a hazardous location.
  GPI Electronic Programmer - GPI's Electronic Programmer was designed to allow end users the ability to customize and configure GPI Electronics to meet your specific needs using a laptop or desktop PC.
  Conditioned Signal Output Module - Combine the Conditioned Signal Output Module with a GPI Turbine Kit to create a low-cost flow sensor with digital signal output which interfaces with various counters, controllers and compatible process equipment.

 
  Return To BuyGPI.com - Your GPI Turbine & Oval Gear Flow Meter Store

 

 
e-commerce software
E-commerce powered by MonsterCommerce shopping carts.