|
|
|
 |
G2 Industrial Series Turbine Meters
Accessory Modules |
Home |
 |
|
Back |
|
|
FM Approved Sensor Kit |
|
|
Open Collector, NPN
Part # 120077-01
The FM Approved Sensor is designed for use with any G2 Turbine Meter when rotor pulse data is required and the meter is located within a hazardous location. It is ideal for indoor or outdoor applications, and the output signal is compatible with existing GPI remote transmitters.
(No Computer Required) |
|
Standard Remote Kit
|
|
 |
Low Level Sine Wave
Part # 113265-1
This module allows remote mounting of the computer electronics for specialized situations such as remote readings or high and low fluid temperature applications. Operational Temperature is -40'F to +250'F (-40'C to +121'C) for metal meters.
(Requires 09 Computer) |
|
FM Approved Remote Kit Assembly |
|
|
Low Level Sine Wave
Part # 113275-1
This assembly module allows remote mounting of the computer electronics for specialized situations such as remote readings or high and low fluid temperature applications while maintaining the Factory Mutual Approval and self-powered design. Operational Temperature is -40'F to +250'F (-40'C to +121'C) for metal meters.
(Requires 09 Computer) |
|
Conditioned Signal Output Module |
|
|
Open Collector or 6 volt Square Wave Signal
Part # 113435-1
This module provides an unscaled, amplified, digital signal from a GPI turbine housing. This module's digital output eliminates the need for addition signal conditioning equipment. Operational Temperature is -40'F to +212'F (-40'C to +100'C). Externally powered, 9 to 35 VDC.
(No Computer Required) |
|
4-20mA Module
|
|
|
4-20mA or 0-5 volt Analog Signal
Part # 125100-1
This module provides a current signal from your GPI meter by accessing circuitry from the on-board computer readout. The 4-20 mA Module is loop powered, 7 to 30 VDC. Operational Temperature is 0'F to +150'F (-17'C to +65'C).
(Requires 09 Computer)
|
|
Pulse Access Module |
|
|
Digital Open Collector Signal
Part # 125060-1
This module provides an unscaled, digital signal from your GPI meter by accessing circuitry from the on-board computer readout. Power is 0 to 60 VDC. Operational Temperature is +14'F to +140'F (-10'C to +160'C)
(Requires 09 Computer) |
|
External Power Module |
|
|
Power Option for the Pulse Access Module
Part # 125070-1
This module provides an external power option for the 09 Computer or the Pulse Access Module. Internal batteries can be used as an auxiliary power source. Power is 7 to 30 VDC @ 1 mA. Operational Temperature is +14'F to +140'F (-10'C to +60'C)
(Requires 09 Computer & Pulse Access Module) |
|
4-20 mA Module for G2 Series Turbine Meters
|
Use this Calibration Container to field calibrate any Liquid Flow Meter. Note: Not recommended for petroleum products.
|
Combine the Conditioned Signal Output Module with a GPI Turbine Kit to create a low-cost flow sensor with digital signal output which interfaces with various counters, controllers and compatible process equipment.
|
Combining the External Power Module with Pulse Access Module and Industrial Grade Turbine allows the use of an external power source (7 to 30Vdc) that supplies voltage to the Computer Electronics.
|
The Factory Mutual (FM) Approved Remote Kit Assembly Modifies all GPI Electronic Digital Meters for applications in specialized situations including remote indication and high or low fluid temperature metering applications.
|
Designed for use with G2 Turbine Meters when pulse output is required and the meter is located with a hazardous location.
|
Combining this Module with an Industrial Grade Turbine and Computer Electronics creates a low-cost flow sensor with both local readout and a pulse output which interfaces with various counters, controllers and compatible process equipment.
|
The kit modifies GPI's Electronic Digital Meters for applications in specialized situations including remote indication and high or low fluid temperature metering applications.
|
GPI's Electronic Programmer was designed to allow end users the ability to customize and configure GPI Electronics to meet your specific needs using a laptop or desktop PC.
|
GPI's new 90' Adaptor Kit allows for horizontal readouts on vertically mounted inline meters.
| | |
|
|
|