|
|
Oval Gear Meters
 |
|
GM Series Oval Gear
Meters are designed for Low Flow and High Accuracy; The "Build Your Own"
Category allows you to fully customize a GM Oval Gear Meter to meet your
specific application. |
|
*Flow ranges listed are based on viscosities of 5.0cP or greater.
See Data Sheets for flow ranges for fluids with viscosities of less than 5cP. |
|
1) Select your GM Oval Gear Meter Connection Size/Range & Body Material |
|
Application Tip: Click on any meter body below to go directly to that meter's Configuration Page.
Pulsed Oval Gear Meters are listed first (GM001-GM020) followed by Mechanical
Oval Gear Meters (GM505-510-515-520) |
| GM001 |
GM002 |
GM003 |
GM005 |
 |
|
|
 |
| Flow Range: 0.13
- 13.2 GPH |
|
Aluminum
Stainless Steel
IP Stainless Steel |
1/8" | |
|
Flow Range:
0.53 - 26.4 GPH |
|
Aluminum
PPS
Stainless Steel
IP Stainless Steel
HP Stainless Steel |
1/4" | |
|
Flow Range: 4.0
- 132.0 GPH |
|
Aluminum
PPS
Stainless Steel
IP Stainless Steel
HP Stainless Steel |
1/4" | |
|
Flow Range:
0.26 - 7.0 GPM |
|
Aluminum
Stainless Steel |
1/2" | |
| |
| GM006 |
GM007 |
GM010 |
GM015 |
|
|
|
|
|
|
Flow Range:
0.8 -15.8 GPM |
|
Aluminum |
3/4" | |
|
Flow Range: 0.8
- 21.0 GPM |
|
PPS |
1" | |
|
Flow Range:
1.6 - 32 GPM |
|
Aluminum
Bronze
Stainless Steel |
1" | |
|
Flow Range:
2.6 - 66.0 GPM |
|
Aluminum
Bronze
Stainless Steel |
1-1/2" | |
| |
| GM020 |
|
|
Oval Gear Meters
are a member of the Positive displacement flow meter family. They
operate by repeatedly filling and emptying compartments of a known volume with a
liquid. The flow rate is then calculated based on the number of times these
compartments are filled and emptied. Want to know more? Learn
More... |
|
Flow Range: 4.0
- 92.5 GPM |
|
Aluminum
Bronze
Stainless Steel |
2" | |
 |
|
|
Mechanical Oval Gear Meters |
| GM505 |
GM510 |
GM515 |
GM520 |
 |
|
|
|
|
Flow Range: 0.26
- 7.0 GPM |
|
Aluminum
Stainless Steel |
1/2" | |
|
Flow Range:
1.6 - 32 GPM |
|
Aluminum
Bronze
Stainless Steel |
1" | |
|
Flow Range: 2.6
- 66.0 GPM |
|
Aluminum
Stainless Steel |
1-1/2" | |
|
Flow Range: 4.0
- 92.5 GPM |
|
Aluminum
Stainless Steel |
2" | |
|
|
|
|
|
|
2) Select Your Sensor |
|
Reed Switch |
or |
Hall Effect | |
|
|
3) Select your Local Display / Output |
 |
 |
 |
Pulse Out (No Display)
Do you need a remote
Transmitter and/or Display
Go to Section 4 below... |
Standard LC Display |
Local Display 4-20mA | |
 |
 |
|
No Display 4-20mA |
Mechanical Display
GM505, GM510, GM525, GM 520 Only | |
|
|
4) Do you need a Remote Display/Transmitter for your Pulse Output Oval Gear Meter? |
 |
 |
 |
GA500
Remote 4-20mA Transmitter
without Display |
GG500
Remote Display
with Pulse Output |
GX500
Remote 4-20mA Transmitter
with Display | |
|
|
5) Do you need a Strainer? |
|
Oval Gear Meters work best with clean fluid, free of debris. We carry Y-Strainers to fit all GPI Oval Gear Meters. Strainers are available in sizes ranging from 1/4" to 2" and come complete with blow-off and plug. For information on available sizes, pricing, etc,
Click Here
or click the picture shown below. |
|
|
|
|
Build a model number and price for your for GM Series Oval Gear Meter by clicking on the appropriate sized meter below or in Section 1 above. Drop-down menus allow you to choose body materials, display/output options and components that are best suited for your specific application.
Still not sure which GM Series Oval Gear Meter is best suited for your application... Call the Flow Specialists at Cross Instrumentation for assistance! We
were doing this a long time before the internet came along, so we're accustomed
to and genuinely welcome your phone calls. If you need help, don't hesitate to call us today! (800)332-3418 |
|
 |
GM Series Oval Gear Meters - Spare Parts
|
Oval Gear Meter Accessories - Y Strainers
| |
List Price: $250.00
BuyGPI Price: $225.00
You Save: $25.00
Converts a low level sine wave, open collector, square wave or contact closure (reed switch) signal to a 4-20mA, 0-20mA r 0-5 volt current output. This unit accepts a 0.25 - 1,000 Hz input frequency.
|
List Price: $410.00
BuyGPI Price: $369.00
You Save: $41.00
Calibrateable remote 6-digit dislay with flowrate and 2 totals for all GM Series Meters
|
Converts a low level sine wave, open collector, square wave or contact closure (reed switch) signal to a 4-20mA, 0-20mA r 0-5 volt current output. This unit accepts a 0.25 - 1,000 Hz input frequency.
|
|
|
| |
|
| |
We Accept: | | |
 |
| |
Secure Transactions by: | |
| |
|
| |
Our Preferred Shipper | | |
 | | |
| |
A Division of... |
 |
|
Cross Company |
| |
Log-In / Log-Out | |
|
|
|
|